LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Remote CD Changer Replacement >> Installation Procedure

Installation Procedure

  1. Position the remote CD changer, with the shipping plug in the bottom position, to the radio and connect the electrical lead.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the retaining screws that secure the CD changer to the radio and tighten to 2.5 N.m (22 lb in).
  3. Remove the shipping plug from the bottom of the CD changer.
  4. Connect the electrical/audio and coaxial cable connectors to the radio control.
  5. Install the radio control into position in the I/P center support bracket.

    Align the radio control locator tab into the center support bracket locator hole.

    6. Fig 1: View Of Radio Control & Screws
    GM1237162Courtesy of GENERAL MOTORS CORP.
  6. Install the radio control retaining screws and tighten to 2.5 N.m (22 lb in).
  7. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  8. Install the RDO/CD MiniFuse® #5 to the I/P electrical center.
  9. Install the cover to the I/P electrical center.
scientia non olet · About LEMON Manuals