LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> STS V >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LH2 with Top Post)  or Battery Negative Cable Replacement (LC3)  or Battery Negative Cable Replacement (LH2 With Side Post)  or Battery Negative Cable Replacement (LY7, LLT With Top Post)  or Battery Negative Cable Replacement (LY7 With Side Post) .
    2. Fig 1: Identifying Battery Current Sensor At Negative Battery Cable
    GM2001858Courtesy of GENERAL MOTORS CORP.
  2. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  3. Squeeze the negative battery cable branches together.
    4. IMPORTANT: Note the position of the battery current sensor prior to removal.
  4. Slide the battery current sensor (2) off of the negative battery cable (1).
scientia non olet · About LEMON Manuals