Removal Procedure

NOTE:

Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
Always route the replacement cable the same way as the original cable.

Fig 1: View Of Battery Cables

Courtesy of GENERAL MOTORS CORP.

Disconnect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection (Side Post) .
Disconnect the battery positive cable (1) from the battery.

Fig 2: View Of Underhood Fuse Box

Courtesy of GENERAL MOTORS CORP.

Remove the wiring harness from the retaining features on the underhood fuse block cover.
Depress the tabs in order to remove the underhood fuse block cover from the underhood fuse block.

Fig 3: Identifying Battery Positive Cable To Underhood Fuse Block

Courtesy of GENERAL MOTORS CORP.

Remove the nut (1) securing the battery positive cable (2) to the underhood fuse block.
Disconnect the cable retaining clip from the stud.
Remove the intake manifold. Refer to Intake Manifold Replacement .

Fig 4: View Of Starter Motor & Connections

Courtesy of GENERAL MOTORS CORP.

Remove the positive battery cable (2) from the starter motor.
Remove the positive battery cable from the retaining features on the engine wiring harness bracket.
Remove the positive battery cable from the vehicle.