LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> SRX 4.6 A, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Battery Current Sensor At Negative Battery Cable
    GM2001858Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the tape tab is pointing away from the battery prior to installation.
  1. Squeeze the negative battery cable branches together, while sliding the NEW battery current sensor (2) up onto the negative battery cable (1).
  2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement (LY7 (RHD))  or Battery Negative Cable Replacement (LY7 and LLT (LHD) with Top Post)  or Battery Negative Cable Replacement (LH2 (LHD) with Top Post)  or Battery Negative Cable Replacement (LH2 (RHD)) .
scientia non olet · About LEMON Manuals