LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LY7 (RHD))  or Battery Negative Cable Replacement (LY7 and LLT (LHD) with Top Post)  or Battery Negative Cable Replacement (LH2 (LHD) with Top Post)  or Battery Negative Cable Replacement (LH2 (RHD)) .
  2. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  3. Squeeze the negative battery cable branches together.
    4. IMPORTANT: Note the position of the battery current sensor prior to removal.
  4. Slide the battery current sensor (2) off of the negative battery cable (1).
    5. Fig 1: Identifying Battery Current Sensor At Negative Battery Cable
    GM2001858Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals