Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the upper control arm.
- Install the upper control arm bolts and tighten to 190 (140 lb ft).
- Connect the upper control arm to the steering knuckle.
- Install the new nut to the upper ball joint stud and tighten to 50 (39 lb ft).
- Install the retaining bolts for the brake hose and wheel speed sensor brackets and tighten to 9 (80 lb in).
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle.
- Verify the wheel alignment. Refer to Wheel Alignment Specifications .
CAUTION:
Refer to Fastener Caution .