LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Wiring Systems And Power Management - Component Connector End Views - Mode Actuator Through Yaw Sensor) >> Component Connector End Views >> Stop Lamp Switch

Stop Lamp Switch

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Stop Lamp Switch Connector End View
GM1866237Courtesy of GENERAL MOTORS CORP.
Stop Lamp Switch

Pin Wire Circuit Function
A 0.35 L-BU/WH 6311 Brake Signal
B 0.35 PK 239 Ignition Voltage
C 0.35 OG/WH 812 12-Volt Reference or I/P Dimming Voltage Reference
D 0.35 PU 7062 Brake Pedal Switch Normally Closed Contact Signal
Connector Part Information
  • Harness Type: Brake/Clutch
  • OEM Connector: 15466671
  • Service Connector: 19149301
  • Description: 4-Way F GT 280 Series (L-GY)
Terminal Part Information
  • Terminated Lead: 13575753
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
scientia non olet · About LEMON Manuals