Three-Way Catalytic Converter Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Three-Way Catalytic Converter Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the engine skid plate (if equipped). Refer to Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ) or Oil Pan Skid Plate Replacement (1500 with RPO NZZ) Remove the transmission support crossmember. Refer to Transmission Support Crossmember Replacement (4WD 2500 Series) or Transmission Support Crossmember Replacement (2WD 2500 Series) or Transmission Support Crossmember Replacement (2WD 1500 Series) or Transmission Support Crossmember Replacement (4WD 1500 Series) Disconnect the oxygen sensors. Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (1500 Series) or Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (2500 Series) , Heated Oxygen Sensor Replacement - Bank 1 Sensor 2 (1500 Series) or Heated Oxygen Sensor Replacement - Bank 1 Sensor 2 (2500 Series) , Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (1500 Series) or Heated Oxygen Sensor Replacement - Bank 2 Sensor 1 (2500 Series) and Heated Oxygen Sensor Replacement - Bank 2 Sensor 2 (1500 Series) or Heated Oxygen Sensor Replacement - Bank 2 Sensor 2 (2500 Series) .
1	Left Exhaust Manifold Nut (Qty: 3) WARNING: Refer to Exhaust Service Warning . WARNING: Refer to Hot Exhaust System Warning . CAUTION: Refer to Fastener Caution . Tighten: 50 N.m (37 lb ft)
2	Seal
3	Right Exhaust Manifold Nut (Qty: 3) Tighten: 50 N.m (37 lb ft)
4	Seal
5	Muffler Clamp Nut Tip: Replace the exhaust muffler clamp with a NEW clamp. Tighten: 22 N.m (17 lb ft)