LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Front Drive Axle) >> Repair Instructions >> Front Differential Carrier Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (9.25 inch)  or Differential Carrier Assembly Replacement (8.25 inch) .
  3. Remove the air conditioning compressor for the 4.8 L, 5.3 L and 6.0 L engines. Refer to Air Conditioning Compressor Replacement (HP2) or Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92 and LMG) .
    4. Fig 1: View Of Front Axle Mounting Bracket (25/35 Series)
    GM365933Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts and the washers from the bracket.
  5. Remove the bracket from the vehicle.
scientia non olet · About LEMON Manuals