Camshaft Position Sensor Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Camshaft Position Sensor Bolt (Qty: 2)
CAUTION:
Refer to Fastener Caution
. Procedure: Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine. Tighten: 12 N.m (106 lb in) |
| 2 | Camshaft Position Sensor Bracket Assembly Procedure: Disconnect the electrical connectors. |
| 3 | Camshaft Position Sensor |
| 4 | Camshaft Position Sensor O-ring Seal Procedure: Lubricate the O-ring seal with clean engine oil. |