LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Programming And Setup - All Systems) >> Repair Instructions >> Electronic Suspension Control Module Programming and Setup >> Electronic Suspension Control Module (ESCM) Replacement/Reprogramming

Electronic Suspension Control Module (ESCM) Replacement/Reprogramming

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

If the electronic suspension control module (ESCM) is reprogrammed or replaced, the following procedures must be performed:

  1. ESCM programming-Refer to Service Programming System (SPS) .
  2. Perform the suspension system calibration procedure. Refer to Suspension Position Calibration (With Z95) or Suspension Position Calibration (Without Z95) .
scientia non olet · About LEMON Manuals