LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Steering Wheel & Steering Column) >> Repair Instructions >> Shift Lever Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering)  or Steering Column Shroud Replacement (With Electronic Tilt Steering) .
  2. Roll back the shift lever seal on the shift lever until the shift lever bolt is exposed.
  3. Disconnect any electrical connectors as needed.
    4. Fig 1: Locating Shift Lever & Screw
    GM1700835Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift lever bolt (2).
  5. Remove the shift lever (1).
scientia non olet · About LEMON Manuals