Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Shift Lever & Screw

Courtesy of GENERAL MOTORS CORP.

Install the shift lever (1).

CAUTION: Refer to Fastener Caution .

Install the shift lever bolt (2) and tighten to 20 N.m (15 lb ft).
Connect all electrical connectors.
Position the shift lever seal.
Install the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering) or Steering Column Shroud Replacement (With Electronic Tilt Steering) .