Liftgate Trim Panel Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Liftgate Trim Finish Panel Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove liftgate window upper garnish molding. Refer to Liftgate Garnish Molding Replacement .
1	Liftgate Trim Finish Panel Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Liftgate Trim Finish Panel Assembly Tip: Pull outward to disengage retainers and clips. Disconnect electrical connector.
3	Liftgate Trim Finish Panel Retainer (Qty: 12)
4	Liftgate Trim Finish Panel Clip (Qty: 5)