LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Auxiliary Body Control Module Programming and Setup >> Enabling the Inclination Sensor - Export

Enabling the Inclination Sensor - Export

IMPORTANT: Only export vehicles with the inclination sensor wired to the XBCM require this procedure. If the inclination sensor is wired directly to the BCM this step is not required. Accidental enabling of the inclination sensor will require reprogramming of the XBCM.

Perform auxiliary BCM special function "Enable inclination sensor".

IMPORTANT: After programming, perform the following to avoid future misdiagnosis:
  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the data link connector.
  3. Turn the ignition ON, with the engine OFF.
  4. Use the scan tool in order to retrieve history DTCs from all modules.
  5. Clear all history DTCs.
scientia non olet · About LEMON Manuals