LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> CTS V, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.2L - DTC P0016 To DTC P0175 >> DTC P0033 >> Component Testing

Component Testing

Static Test

  1. Ignition OFF, disconnect the harness connector at the SCB solenoid.
  2. Test for 30-55 Ω between the control terminal 2 and the voltage supply terminal 1 of the SCB solenoid.
    • If the resistance is not within the specified range, replace the SCB solenoid.

Dynamic Test

  1. Install a 3A fused jumper wire between the ignition supply circuit terminal 1 and 12V. Install a jumper wire between the control terminal 2 and ground.
  2. Toggle the jumper wire between the control terminal and ground.
  3. Feel and listen for the operation of the SCB solenoid.
    • If the function does not perform as specified, replace the SCB solenoid.
scientia non olet · About LEMON Manuals