LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C0450 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the VES actuator harness connector.
  2. Measure for 5-10 ohms of resistance between the VES actuator terminals A and B.
    • If the resistance is outside the specified range, replace the VES actuator.
  3. Measure for infinite ohms of resistance between each VES actuator terminal and the VES actuator housing.
    • If less than the specified range, replace the VES actuator.
scientia non olet · About LEMON Manuals