LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Front End Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Inflatable Restraint Front End Sensor & Retaining Bolts
    GM1226200Courtesy of GENERAL MOTORS CORP.
  1. Install the sensor from the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the retaining bolts to the inflatable restraint front end sensor.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals