LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0899 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition OFF, measure the voltage at the battery terminals.
  2. Ignition ON, observe the scan tool EBCM Battery Positive Voltage parameter..
  3. Verify that battery terminal voltage and Battery Positive Voltage parameter readings do not differ by more than 2 volts.
scientia non olet · About LEMON Manuals