LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Support Replacement >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    2. Fig 1: Identifying Mass Air Flow Sensor Wire
    GM928982Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the MAF sensor wire (1) from the radiator support retainer clip.
  3. Disconnect the surge tank inlet hose assembly from the radiator support tabs.
    4. Fig 2: Identifying Radiator Support Bolts
    GM928973Courtesy of GENERAL MOTORS CORP.
  4. Remove the radiator support bolts.
    5. IMPORTANT: Note the position of the radiator support in relationship to the fan shroud. This must be reassembled correctly in order to retain the fan shroud.
    Fig 3: Identifying Radiator Support
    GM928978Courtesy of GENERAL MOTORS CORP.
  5. Remove the radiator support.
scientia non olet · About LEMON Manuals