LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Inlet Hose Replacement >> Installation Procedure

Installation Procedure

    NOTE: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting which could cause the fitting to crack or break.
    IMPORTANT: Lubricate the inside diameters of the hose with clean coolant prior to installation.
  1. Install the radiator inlet hose.
    2. Fig 1: Radiator Inlet Hose
    GM923780Courtesy of GENERAL MOTORS CORP.
  2. Connect the radiator inlet hose to the engine.
  3. Engage tension on the radiator inlet hose clamp at the engine using J 38185  . See Special Tools .
  4. Connect the radiator inlet hose to the radiator.
  5. Engage tension on the radiator inlet hose clamp at the radiator using J 38185  . See Special Tools .
  6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  7. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (GE 47716) .
scientia non olet · About LEMON Manuals