LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P0562 >> Circuit/System Testing

Circuit/System Testing

  1. Verify DTC P0562 is set as current.
  2. Engine running, measure the voltage at the battery terminals and compare it with the Ignition 1 Signal parameter. The battery and Ignition 1 signal readings do not differ more than 2 volts.
    • If greater than the specified value, test the Ignition 1 circuits X1 terminal 19, X2 terminal 13 and terminal 28 and ground circuits X2 terminal 73 and X3 terminal 73 for an open/high resistance.
  3. If the circuits test normal, replace the ECM.
scientia non olet · About LEMON Manuals