Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Battery Negative Cable From Battery

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

IMPORTANT: Clean any existing oxidation from the contact surface of the battery cable using a wire brush before installing the battery cable to the battery.

Connect the battery negative cable to the battery.
Tighten: Tighten the negative battery cable to battery nut to 8 N.m (71 lb in).
Unlock the Theftlock® radio (if applicable).
Program the radio stations back into the radio as recorded at the beginning of the procedure.
Set the clock to the current time. Refer to Radio/Audio System Description and Operation .
Reinitialize both power windows. Refer to Power Window Reinitialization .