LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Stabilizer Shaft Links
GM874639Courtesy of GENERAL MOTORS CORP.
  1. Install the stabilizer shaft link to the vehicle.
    IMPORTANT: Do not tighten the nuts at this time.
    IMPORTANT: Hold the shaft link studs with the hex tool to prevent damage to the link seal.
  2. Install the stabilizer shaft link lower retaining nut.
    NOTE: Refer to Fastener Notice .
  3. Install the stabilizer shaft link upper retaining nut.

    Tighten:  Tighten the nuts to 115 N.m (95 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals