LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS V >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Heat Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Battery Heat Shield
    GM1296794Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the openings in the heat shield are aligned with the battery terminal bosses.
  1. Position the battery heat shield downward over the battery.
    2. Fig 2: View Of Battery Heat Shield Locking Tabs
    GM1296793Courtesy of GENERAL MOTORS CORP.
  2. Ensure that the heat shield locking tabs (1) are engaged.
  3. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
    4. Fig 3: View Of Battery Positive & Negative Cables
    GM1296154Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  4. Connect the battery positive cable (1) to the battery.

    Tighten:  Tighten the battery positive cable to 17 N.m (13 lb ft).

  5. Connect the battery negative cable (2). Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals