LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS V >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Fluid Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Place the ignition switch into OFF position.
  2. Remove the RH front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .
  3. Thoroughly clean the area around the brake pressure modulator (BPMV) of all dirt and debris.
    4. Fig 1: View Of Brake Fluid Pressure Sensor Electrical Connector
    GM1906574Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the brake fluid pressure sensor electrical connector.
  5. Remove the brake fluid pressure sensor (1).
scientia non olet · About LEMON Manuals