LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS Base, 4.6 A, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Diagnostic Information and Procedures >> DTC B2710 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the shift lock control solenoid.
  2. Ignition ON, test between the Ignition voltage circuit terminal E and ground.
    • If the test lamp did not illuminate, test the B+ circuit for a short to ground or open/high resistance. If the circuit tests normal, test or replace the shift lock control solenoid.
  3. Install a test lamp between the B+ circuit terminal E and control circuit terminal K.
  4. Ignition ON, depress and release the brake pedal several times. The test lamp should turn ON and OFF as commanded.
    • If the test lamp is always ON, test the control circuit for short to ground.If the circuit tests normal, replace the RCDLR.
    • If the test lamp is always OFF, test the control circuit for an open/high resistance or short to voltage. If the circuit test normal, replace the RCDLR.
  5. Test or replace the shift lock control solenoid.
scientia non olet · About LEMON Manuals