Circuit Description

The longitudinal sensor is part of the yaw/lateral sensor assembly. The longitudinal sensor only used on 4-wheel drive (4WD) vehicles. The longitudinal accelerometer converts the change in vehicle motion, or inertia, into a voltage signal. This signal is sent to the EBCM.

The voltage signal ranges, from 2.4-2.6 volts at zero speed change, constant motion, or stationary. The longitudinal accelerometer voltage signal drops when the vehicle is under deceleration. The longitudinal accelerometer voltage signal increases when the vehicle is under acceleration. The usable output voltage range for the longitudinal accelerometer is 0.48-4.82 volts. The longitudinal accelerometer sensor bias compensates for sensor mounting alignment errors and electronic signal errors.