LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> SRX 3.6 7, RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Memory Seat Module & Heated Seat Module Retaining Screws
    GM792015Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the memory seat module and install the memory seat module screws (1).

    Tighten:  Tighten the screws 2 N.m (18 lb in).

    2. Fig 2: View Of Memory Seat Module
    GM792019Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connections to the module.
  3. Install the front seat cushion. Refer to Front Seat Cushion Replacement .
  4. Calibrate the memory seat module for proper adjustable pedal operation. Refer to Adjustable Pedal System Calibration .
  5. Calibrate the seat. Refer to Memory Seat Calibration .
  6. Program the memory seat control module. Refer to Memory Seat Control Module Programming and Setup .
scientia non olet · About LEMON Manuals