LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Theft Deterrent Control Module
    GM884916Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent control module onto the ignition lock cylinder case assembly.
    2. CAUTION: Refer to SIR INFLATOR MODULE COIL CAUTION .
  2. Connect the connector to the theft deterrent control module.
  3. If necessary, connect the connector to the ignition lock cylinder case.
  4. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  5. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
  6. Enable the SIR. Refer to SIR Disabling and Enabling .
  7. Program the theft deterrent system. Refer to Control Module References .
scientia non olet · About LEMON Manuals