LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock Systems & Door Handles >> Repair Instructions >> Accessory and Liftgate Control Module Replacement

Accessory and Liftgate Control Module Replacement

Fig 1: View Of Accessory & Liftgate Control Module
GM1889136Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the body side trim panel. Refer to Body Side Rear Trim Panel Replacement (w/TB5) or Body Side Rear Trim Panel Replacement (w/o TB5) .
1 Accessory and Liftgate Control Module

Procedure

  1. Disconnect the electrical connectors.
  2. Reprogram the accessory and liftgate control module if replaced. Refer to Control Module References .

Tip: 
  1. The liftgate control module is located behind the liftgate close actuator assembly.
  2. Push in the tab to release the module from the liftgate actuator bracket.