LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Rear Object Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Insert the sensor into the housing.
    Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the rear object sensor.
  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
scientia non olet · About LEMON Manuals