LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Frame And Underbody) >> Repair Instructions >> Assist Step Finish Cover Replacement (Power)

Assist Step Finish Cover Replacement (Power)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Power Assist Step Finish Cover & Screws
GM1809291Courtesy of GENERAL MOTORS CORP.
Assist Step Finish Cover Replacement (Power)

Callout Component Name

Preliminary Procedures

  1. Deploy the power assist step.
  2. Remove the power assist step pad. Refer to Assist Step Pad Replacement (Power) .
1 Power Assist Step Finish Cover Screws (Qty: 10)
NOTE: Refer to Fastener Notice .

Tighten:  6 N.m (53 lb in)

2 Power Assist Step Finish Cover