Removal Procedure

Fig 1: View Of Rearview Mirror Electrical Connector

Courtesy of GENERAL MOTORS CORP.

NOTE: When servicing electrochromic glass that is broken, or if glass breaks during servicing, be cautious not to spill electrochromic fluid onto vehicle. Doing so will cause damage to the vehicle.

Disconnect the electrical connector from the back of the mirror.
Remove the wire cover.
Adjust the mirror to the full upward position.
Remove the base trim cover.

Fig 2: View Of Rearview Mirror Mounting Components

Courtesy of GENERAL MOTORS CORP.

Loosen the screw (3) in order to remove the mirror (2) from the button assembly (1).
Slide the mirror assembly in an upward motion in order to remove.