Remote Control Door Lock Receiver Replacement (Except Avalanche/Escalade EXT)

Fig 1: Identifying Remote Control Door Lock Receiver (Except Avalanche/Escalade EXT)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the back rear corner upper garnish molding. Refer to Body Rear Corner Garnish Molding Replacement - Left Side (w/E61) or Body Rear Corner Garnish Molding Replacement - Left Side (w/o E61) .
1	Remote Control Start Antenna Assembly Tip:  Disconnect the electrical connector.
2	Remote Control Door Lock Receiver Tip:  The module slides and snaps into the body structure. Disconnect the electrical connector. If a replacement module is installed, program the module. Refer to Control Module References .