LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade AWD >> Repair and Diagnosis >> Steering >> Steering Linkage >> Repair Instructions >> Pitman Arm Replacement >> Installation Procedure

Installation Procedure

  1. Install the pitman arm onto the steering gear.
    2. Fig 1: View Of Steering Gear & Pitman Arm
    GM1862648Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install a new pitman arm washer (2) and nut (1).

    Tighten:  Tighten the nut to 250 N.m (184 lb ft).

  3. Remove the steering gear from the vise.
  4. Install the steering gear. Refer to Steering Gear Replacement (Rack and Pinion) or Steering Gear Replacement (Non-Rack and Pinion) or Steering Gear Replacement (Two Mode Hybrid) .
  5. Adjust the front toe. Refer to Front Toe Adjustment .
scientia non olet · About LEMON Manuals