LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> CTS 3.6 V, AWD >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    Fig 1: Wheel Speed Sensor Bolt
    GM1969829Courtesy of GENERAL MOTORS CORP.
  1. Install the wheel speed sensor and bolt (1) to the suspension knuckle.

    Tighten:  Tighten the bolt to 9 N.m (80 lb in).

    2. Fig 2: Wheel Speed Sensor Electrical Connector
    GM1969809Courtesy of GENERAL MOTORS CORP.
  2. Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
  3. Connect the wheel speed sensor electrical connector (2).
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals