Rear Camber Adjustment: Notes
Tools Required
J 45845 Caster and Camber Adjusting Tool. See Special Tools .
The caster and camber adjustments are made by loosening the lower control arm adjustment bolts and repositioning the lower control arm.
IMPORTANT:
Before adjusting the caster and camber angles, jounce the front bumper 3 times to allow the vehicle to return to normal height.
Measure and adjust the caster and the camber with the vehicle at curb height. The front suspension Z dimension and the rear suspension D dimension are indicated in Trim Heights. Refer to Trim Height Inspection .
Measure and adjust the caster and the camber with the vehicle at curb height. The front suspension Z dimension and the rear suspension D dimension are indicated in Trim Heights. Refer to Trim Height Inspection .