LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Object Detection System) >> Repair Instructions >> Information Center Telltale Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the RPA tell tale indicator into the bezel.
    Fig 1: View Of Information Center Telltale Assembly
    GM1233599Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector (2).
  3. Locate the rear bezel hook retainers (1) into the headliner assembly.
  4. Push upward on the front of the RPA bezel in order to secure the retaining clips (3).
scientia non olet · About LEMON Manuals