LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LC3) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Generator & Mounting Stud
    GM927952Courtesy of GENERAL MOTORS CORP.
  1. Install the generator.
    2. Fig 2: View Of Front Upper Generator Bolt
    GM927950Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the upper generator bolt.

    Tighten:  Tighten the generator bolts to 50 N.m (37 lb ft).

    3. Fig 3: View Of Generator & Idler Pulley Assembly
    GM1237972Courtesy of GENERAL MOTORS CORP.
  3. Install the idler pulley assembly (3) and bolt (1).
  4. Install the nut (2).

    Tighten the generator fasteners to the following torque values:

    Tighten: 

    1. Tighten the idler pulley bolt (1) to 50 N.m (37 lb ft).
    2. Tighten the idler pulley nut (2) to 50 N.m (37 lb ft).

    5. Fig 4: View Of Battery Positive/Starter Cable Terminal & Nut
    GM1237973Courtesy of GENERAL MOTORS CORP.
  5. Install the starter cable terminal to the generator:
    1. Install the starter cable terminal to the stud.
    2. Install the starter cable nut (2).

      Tighten:  Tighten the starter cable nut to 20 N.m (15 lb ft).

    3. Slide the boot (1) over the generator stud (4).
  6. Position the generator coolant hose assembly to the generator and secure with the bolt.

    Tighten:  Tighten the bolt to 27 N.m (20 lb ft).

    7. Fig 5: View Of Generator Electrical Connector
    GM1237975Courtesy of GENERAL MOTORS CORP.
  7. Connect the generator electrical connector (1).
  8. Install the front suspension crossmember. Refer to Front Suspension Crossmember Replacement .
  9. Fill the cooling system. Refer to Draining and Filling Cooling System (GE 47716) or Draining and Filling Cooling System (Static Fill) .
  10. Connect the negative battery cable (2). Refer to Battery Negative Cable Disconnection and Connection .
  11. Install the generator drive belt. Refer to DRIVE BELT REPLACEMENT .
scientia non olet · About LEMON Manuals