Installation Procedure
- Connect the battery negative cable to the battery.
Tighten: Tighten the negative battery cable to battery nut to 8 N.m (71 lb in).
- Unlock the Theftlock® radio (if applicable).
- Program the radio stations back into the radio as recorded at the beginning of the procedure.
- Set the clock to the current time. Refer to Radio/Audio System Description and Operation .
- Reinitialize both power windows. Refer to Power Window Reinitialization .
NOTE:
Refer to Fastener Notice
.
IMPORTANT:
Clean any existing oxidation from the contact surface of the battery cable using a wire brush before installing the battery cable to the battery.