LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0121 >> Test Description

Test Description

The number below refers to the step number on the diagnostic table.

  1. 2:  This step determines whether the DTC is current.
DTC C0121

Step Action Yes No
Schematic Reference: Antilock Brake System Schematics 
1 Did you perform the Diagnostic System Check - Vehicle? Go to Step 2  Go to Diagnostic System Check - Vehicle
2 
  1. Use the scan tool in order to clear the DTCs.
  2. Cycle the ignition to the OFF position.
  3. Start the engine.
  4. In park or neutral, release the brake.
  5. Turn OFF the engine.
Does the DTC reset?		 Go to Step 3  Go to Testing for Intermittent Conditions and Poor Connections
3 Replace the electronic brake control module (EBCM). Refer to Control Module References for replacement, setup and programming.
Did you complete the repair?		 Go to Step 4  -
4
  1. Use the scan tool in order to clear the DTCs.
  2. Cycle the ignition to OFF and then ON.
Does the DTC reset?		 Go to Step 2  System OK
scientia non olet · About LEMON Manuals