LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Lumbar Switch & Electrical Connector
    GM1248787Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the lumbar switch.
    2. Fig 2: View Of Finish Panel Bottom
    GM1247980Courtesy of GENERAL MOTORS CORP.
  2. Install the lumbar switch to the finish panel. Press until the switch snaps into place.
  3. Install the finish panel. Refer to Finish Panel Replacement - Driver Seat Outer .
scientia non olet · About LEMON Manuals