LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Remote CD Changer Replacement >> Installation Procedure

Installation Procedure

  1. Position the remote CD changer, with the shipping plug in the bottom position, to the radio and connect the electrical lead.
    2. NOTE: Refer to Fastener Notice .
  2. Install the retaining screws that secure the CD changer to the radio.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Remove the shipping plug from the bottom of the CD changer.
  4. Connect the electrical/audio and coaxial cable connectors to the radio control.
  5. Install the radio control into position in the I/P center support bracket.

    Align the radio control locator tab into the center support bracket locator hole.

    6. Fig 1: View Of Radio Control & Screws
    GM1237162Courtesy of GENERAL MOTORS CORP.
  6. Install the radio control retaining screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  7. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  8. Install the RDO/CD MiniFuse® #5 to the I/P electrical center.
  9. Install the cover to the I/P electrical center.
scientia non olet · About LEMON Manuals