Removal Procedure

Fig 1: View Of Radio Control & Screws

Courtesy of GENERAL MOTORS CORP.

Remove the cover from the I/P electrical center.
Remove the RDO/CD MiniFuse® #5 from the I/P electrical center.
Remove the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
Remove the screws retaining the radio control to the I/P center support bracket.
Begin to remove the radio control from the center support bracket enough to access the connectors at rear of the radio control.
Disconnect the electrical/audio and coaxial cable connectors from the radio control.
Remove the radio control.
Remove the retaining bolts from the radio mounting bracket. Remove the bracket from the radio.