LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Amplifier Replacement >> Installation Procedure

Installation Procedure

  1. Position the amplifier to the electrical multi-use bracket and connect the electrical leads to the amplifier.
  2. Install the amplifier to the bracket.
    3. Fig 1: View Of Electrical Multi-Use Bracket
    GM1237174Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the 4 amplifier retaining screws to the bracket.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  4. Install the cover to the I/P electrical center.
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals