Tilt/Telescoping Soft Stop Setup Procedure
- Turn ON the ignition, with the engine OFF.
- Select Body and Accessories with a scan tool.
- Select Seats.
- Select Special Functions.
- Select Driver Position Module.
- Select Clear Soft Stops.
- Press the ON soft key. The scan tool should display Telescope Soft Stops Learned No and Tilt Soft Stops Learned No.
- Exit from the Clear Soft Stops Special Function.
- View the Column Soft Stops data list.
- Tilt the column all the way down. Hold the switch in the down position for 2 seconds after the column reaches the end of its travel.
- Telescope the column all the way forward. Hold the switch in the forward position for 2 seconds after the column reaches the end of its travel.
- Telescope the column all the way rearward. Hold the switch in the rearward position for 2 seconds after the column reaches the end of its travel. The scan tool should display Telescope Soft Stops Learned Yes.
- Tilt the column all the way up. Hold the switch in the up position for 2 seconds after the column reaches the end of its travel. The scan tool should display Tilt Soft Stops Learned Yes.