Scan Tool Data List

Instrument Panel Module (IPM) Scan Tool Data List

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Turn the Ignition ON, with the Engine OFF
Battery Voltage Signal	Load Management	Volts	12.6 V
Column Lock Relay	Outputs	Enabled/Disabled	Enabled
Telescope Forward Switch	Inputs	Active/Inactive	Inactive
Telescope Rearward Switch	Inputs	Active/Inactive	Inactive
Tilt Down Switch	Inputs	Active/Inactive	Inactive
Tilt Up Switch	Inputs	Active/Inactive	Inactive

Memory Seat Module (MSM) Scan Tool Data List

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Default Telescope Exit Position	Telescope Sensor	Volts	3.76 V
Default Tilt Exit Position	Tilt Sensor	Volts	3.76 V
Driver 1 Memorized Position	Telescope Sensor	Volts/Counts	0.7-3.2 V (45-157 Counts)
Driver 1 Memorized Position	Tilt Sensor	Volts/Counts	1.6-4.2 V (88-207 Counts)
Driver 2 Memorized Position	Telescope Sensor	Volts/Counts	0.7-3.2 V (45-157 Counts)
Driver 2 Memorized Position	Tilt Sensor	Volts/Counts	1.6-4.2 V (88-207 Counts)
Memory 1 Telescope Exit Position	Telescope Sensor	Volts	Varies
Memory 1 Tilt Exit Position	Tilt Sensor	Volts	Varies
Memory 2 Telescope Exit Position	Telescope Sensor	Volts	Varies
Memory 2 Tilt Exit Position	Tilt Sensor	Volts	Varies
Telescope Forward Command	Telescope Sensor	On/Off	Off
Telescope Rearward Command	Telescope Sensor	On/Off	Off
Telescope Sensor	Telescope Sensor	Volts/Counts	0.7-3.2 V (45-157 Counts)
Telescope Soft Stops Learned	Telescope Sensor	Yes/No	Yes
Tilt Down Command	Tilt Sensor	On/Off	Off
Tilt Sensor	Tilt Sensor	Volts/Counts	1.6-4.2 V (88-207 Counts)
Tilt Soft Stops Learned	Tilt Sensor	Yes/No	Yes
Tilt Up Command	Tilt Sensor	On/Off	Off

Steering Column Lock Control Module (SCLCM) Scan Tool Data List

Scan Tool Parameter	Data List	Units Displayed	Typical Data Value
Column Lock Relay Command	BCM	On/Off	On
Column Lock Relay Signal	BCM	On/Off	On