LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> STS Base, 4.6 A, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Front Drive Axle) >> Repair Instructions >> Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front propeller shaft constant velocity (CV) joint shield bolts (1).
  3. Remove the front propeller shaft CV joint heat shield (2).
    Fig 1: Identifying Propeller Shaft CV Joint Heat Shield
    GM899068Courtesy of GENERAL MOTORS CORP.