Installation Procedure
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the window panel guide assembly (2) into the rear track rail.
- Install the front extension to the track.
- Position the rear track to the sunroof frame.
- Install the rear track screws (1, 5).
- Loosely install the screws for the entire length of the tracks. Ensure that the track being serviced is parallel to the other track.
- Install the rear track front extension screw (3, 5)
Tighten: Tighten the screws to 5 N.m (44 lb in).
- Install the rear, center, and front windows. Refer to Sunroof Window Replacement (Front) or Sunroof Window Replacement (Rear Vent) or Sunroof Window Replacement (Center) or Sunroof Window Replacement (Rear Stationary) .
- Install the sunroof exterior trim covers to the side of the track that was serviced. Refer to Sunroof Exterior Trim Cover Replacement (Front) or Sunroof Exterior Trim Cover Replacement (Rear) or Sunroof Exterior Trim Cover Replacement (Rear Sides) or Sunroof Exterior Trim Cover Replacement (Front Sides) .
NOTE:
Refer to Fastener Notice
.